STIHL FS 70 RC-E Professional Brushcutter (27.2cc) w/ Easy2Start

Extremely robust 0.9 kW brushcutter with loop handle and 2-MIX engine. Simplified starting procedure. Increased starting comfort with ErgoStart. Up to 20% lower fuel consumption and 70% reduction in exhaust emissions compared to conventional two-stroke engines without 2-MIX technology. 4-bladed grass-cutting blade for mowing large areas of tough grass. Also suitable for thinner bushes or reeds.

• STIHL ErgoStart (FT) - STIHL ErgoStart cuts the effort required to start the tool by half, while the starter cord can be pulled at just one third of the normal force. A coil spring between the starter cord and the crankshaft smoothes out force peaks, making them virtually undetectable through the cord itself.
• STOP BUTTON - RESTART WORK QUICKLY. With the stop button, you can switch off your power tool quickly and easily for a short break, for example. As the button springs back to its original position after actuation, the engine is immediately ready to start again. This provides more comfort after breaks and increases your work efficiency.
• STIHL 2-MIX-Engine - 2-stroke engine with stratified charge. A fuel-free layer of air is created between the burned charge in the combustion chamber and the fresh charge in the crankcase, reducing the amount of fuel lost during the charge cycle. This results in more power with a lower weight, up to 20% lower fuel consumption than regular 2-stroke engines and significantly reduced exhaust emissions.
• Multi-function control handle - Easy, comfortable thumb-operated control means the operator's hand never leaves the handle.
• Basic harness - For use with loop handle machines.
• Loop handle ® - The loop handled grass trimmers and brushcutters are ideal for working in areas where space is limited, e.g. thinning between bushes and shrubs.
• Manual fuel pump (Purger) - A small fuel pump delivers fuel to the carburettor at the touch of a button. This reduces the number of starting strokes required following extended breaks in operations.
• Goggles - It is important to protect your eyes from flying particles and harmful UV radiation. Therefore a pair of safety goggles/glasses are supplied with the the machine. Note: Additional face protection must be worn when working with brushcutters.