Irwin

Heavy duty aluminum frame with composite body for durability. V-groove edge for leveling pipe, making the job easier and quicker. Locking dial vial...

Dual-chamber design increases level durability, ensuring accuracy over time, and resists twisting twice more than traditional I-beams. Plumb Site o...

Designed for precision and durability, the Irwin 2PK T-Shank 3" Bi-Metal Jig Saw Blades deliver optimal cutting performance across a variety of mat...

Accurately machined steel Corrosion resistant nickel plating

IRWIN Marathon circular saw blades last longer by design. New heat/vent expansion slots reduce vibration, providing longer life for the blade and s...

M2 advanced tooth geometry and Tri-Ground teeth provide a fast, efficient cut. Deep Gullets provide rapid removal of chips. Carpenter saw's 12-poin...

This all-purpose, bevel-edge chisel has a large strike cap and split-proof handle withstands repetitive hammer strikes. Ergonomic handle design wit...

IRWIN Wood Countersinks feature a tapered drill and wide flutes that drill fast, clean pilot holes and ensure a tight fit for screws. They have an ...

Speedbor Max is the fastest Speedbor. Tri flute design for faster chip ejection. There are 3 cutting edges for added durability and the full screw ...

Irwin flagging tapes are made of weatherproof poly vinyl chloride. They are bright, and fade resistant for maximum visibility. Ideal for construct...

Marking chalk marks are temporary. Provides greater visibility in standard lighting conditions. Durable formula is weather-resistant and suitable f...

Bits are made stronger and last longer because a harder cutting edge is welded to the base material. 2x nail cutting life compared to standard IRWI...

The IRWIN Combination Square is constructed with a durable cast zinc body and a rust-proof stainless steel blade. It's black, precision-etched scal...

With 600 lbs. of sustained clamping force, the IRWINQUICK-GRIPOne-Handed Bar Clamp, Heavy-Duty, is one of the top powerful one-handed bar clamps av...

The newly redesigned IRWIN Accessory Storage Cases are visibly better. They have clear lids for easy viewing of content and are stackable for easy ...

The IRWIN Stake Flags, 100 pack, provides enough marking flags to stake out even the largest areas. These bright orange, fade-resistant flags are i...

15 piece, BLACK oxide, drill bit set, oxide treatment resists corrosion, helps prevent bit from rusting, 135 degree split point tip starts on conta...

Titanium Nitride Coating resists heat and friction, extending the cutting edge life up to 6 times that of other high-speed step drill bits. Made fr...

This IRWIN Universal Handsaw features a unique handle-to-blade design and triple-ground teeth to completely eliminate binding and cut up to 3 times...

Dual-chamber design increases level durability, ensuring accuracy over time, and resists twisting twice more than traditional I-beams. Plumb Site o...

Contains the most commonly used sizes for plumbers, electricians and general applications | 4/6 Variable pitch teeth for reduced noise and improved...

This IRWIN 18-Piece Black Oxide Drill Bit Set includes drill bits with a black oxide surface to resist corrosion. The 135° split point helps preven...

2-9/16" diameter, Speedbor max self feed wood drill bit, 3 times the cutting area & edges of standard self feed bits, 7/16" Hex quick change im...

3 Piece, Speedbor Max Drill Bit Set, Includes: 5/8", 3/4" and 1", Standard Length, Tri-Flute Design For Faster Chip Ejection, Cutting Spurs Have 3 ...

For fine woodwork, there's just no substitute for a coping saw. There are, however, substitutes for standard coping saw blades. IRWIN coping saw bl...

Thread and tap more efficiently with the Hanson PTS Drive Tool Module. The quick set die handle simply inserts and remove dies, eliminating the nee...

Rust-proof stainless steel blade Black precision etched scales High impact ABS handle

The auger bit fits the power drill 1 - 100. The solid center design provides extra rigidity while boring. Wide lands keep the bit straight while bo...

The Irwin Tools Black Oxide Hex Shank Drill Bit is a 2-piece Black Oxide drill bit designed to work with todays 1/4-Inch quick change chucks and ex...

These IRWIN HANSON Machine Screw Taps are great for routine maintenance, repair work and for re-threading where high accuracy and tolerance thread ...

Ideal for plumbing and air applications

These IRWIN HANSON Hexagon Dies are ideal for maintenance and repair work. They are recommended for use with hexagon die stocks, but when space is ...

Get your thread work done with speed and precision using the Hanson 3/4 in. – 10 NC Hexagon Die With 1-7/16 in. Diameter. With rugged, high-carbon ...

These IRWIN HANSON Hexagon Dies are ideal for maintenance and repair work. They are recommended for use with hexagon die stocks, but when space is ...

These IRWIN HANSON Machine Screw Taps are great for routine maintenance, repair work and for re-threading where high accuracy and tolerance thread ...

These IRWIN HANSON Machine Screw Taps are great for routine maintenance, repair work and for re-threading where high accuracy and tolerance thread ...

M2Tooth Technology: patent-pending advanced tooth geometry and Tri-Groundteeth provide a fast, efficient cut Deep Gulletsprovide rapid removal of ...

Silicone coat allows the blade to slice easier through material reducing pitch and resin buildup when cutting pressure-treated lumber. Construction...

These IRWIN Metal-Cutting Circular Saw Blades are laser-cut and feature anti-vibration vents to keep the blade cool for smooth and accurate cuts. T...

These IRWIN HANSON Pipe Taper Taps cut internal threads in pipes. Each taper tap is great for pipe fittings and is tapered at a rate of 3/4 inches ...

Precise 90-degree angle. Delivers powerful clamping force up to 1, 150 pounds. Deep 3-3/4 inch jaw depth for optimized pressure distribution. Secur...

The IRWIN SPEEDBOR Lock-n-Load Quick Change Extension Bit Holder is built to last with a durable carbon steel sleeve for a long life. The Lock-n-Lo...

The IRWIN SPEEDBOR Lock-n-Load Quick Change Extension Bit Holder is built to last with a durable carbon steel sleeve for a long life. The Lock-n-Lo...

The IRWIN 4935655 7/16-Inch Lock N' Load Quick Change Bit Holder 12-Inch Over All Length has a Carbon steel construction sleeve and body for durabi...

The IRWIN QUICK-GRIP Handi-Clamp features a QUICK-RELEASE trigger that makes positioning easier while allowing the clamp to release faster. This cl...

The IRWIN QUICK-GRIP Pipe Clamp features an innovative clutch system that eliminates the need for threaded pipe. With large feet for more stability...

Use this for making temporary marks on metal surfaces. Made of natural soapstone for superior marking. White markings are easy to see and easy to c...

IRWIN STRAIT-LINE 100' Hi-Tensile Replacement Line is 2.5X stronger than traditional chalk reels for fewer breaks. This durable replacement line is...