PlastiSpan Type 1 EPS Insulation Board

PlastiSpan Insulation is a Type 1, moulded expanded polystyrene (EPS) insulation with an R-value of 3.75 per inch and compressive resistance of 10 psi. PlastiSpan is a versatile insulation product that can be used in a wide range of applications. PlastiSpan EPS is a closed cell, rigid foam plastic insulation that maintains its R-value for the life of the product. When applied as continuous insulation over foundations, walls and roofs, PlastiSpan insulation is a cost-effective solution that eliminates thermal bridging, increasing your total R-value. By increasing your energy efficiency with PlastiSpan insulation, you will effectively reduce your heating and cooling costs. PlastiSpan Insulation is code listed with CCMC 12424-L and meets the requirements of CAN ULC S701.1, Type 1.

• Meets all building codes for above & below grade
• Most cost-effective insulation per R-value
• Thermal resistance - RSI 0.65/25 mm (R-value 3.75/inch)
• Closed cell insulation resists moisture
• Compressive Resistance: 10 psi
• Easy to cut and install
• Maintains R-value
• Increases energy efficiency for reduced heating and cooling costs
• Can be used in Retrofit & new construction

PlastiSpan Insulation is a Type 1, moulded expanded polystyrene (EPS) insulation with an R-value of 3.75 per inch and compressive resistance of 10 psi. PlastiSpan is a versatile insulation product that can be used in a wide range of applications. PlastiSpan EPS is a closed cell, rigid foam plastic insulation that maintains its R-value for the life of the product. When applied as continuous insulation over foundations, walls and roofs, PlastiSpan insulation is a cost-effective solution that eliminates thermal bridging, increasing your total R-value. By increasing your energy efficiency with PlastiSpan insulation, you will effectively reduce your heating and cooling costs. PlastiSpan Insulation is code listed with CCMC 12424-L and meets the requirements of CAN ULC S701.1, Type 1.

• Meets all building codes for above & below grade
• Most cost-effective insulation per R-value
• Thermal resistance - RSI 0.65/25 mm (R-value 3.75/inch)
• Closed cell insulation resists moisture
• Compressive Resistance: 10 psi
• Easy to cut and install
• Maintains R-value
• Increases energy efficiency for reduced heating and cooling costs
• Can be used in Retrofit & new construction

PlastiSpan Insulation is a Type 1, moulded expanded polystyrene (EPS) insulation with an R-value of 3.75 per inch and compressive resistance of 10 psi. PlastiSpan is a versatile insulation product that can be used in a wide range of applications. PlastiSpan EPS is a closed cell, rigid foam plastic insulation that maintains its R-value for the life of the product. When applied as continuous insulation over foundations, walls and roofs, PlastiSpan insulation is a cost-effective solution that eliminates thermal bridging, increasing your total R-value. By increasing your energy efficiency with PlastiSpan insulation, you will effectively reduce your heating and cooling costs. PlastiSpan Insulation is code listed with CCMC 12424-L and meets the requirements of CAN ULC S701.1, Type 1.

• Meets all building codes for above & below grade
• Most cost-effective insulation per R-value
• Thermal resistance - RSI 0.65/25 mm (R-value 3.75/inch)
• Closed cell insulation resists moisture
• Compressive Resistance: 10 psi
• Easy to cut and install
• Maintains R-value
• Increases energy efficiency for reduced heating and cooling costs
• Can be used in Retrofit & new construction

PlastiSpan Insulation is a Type 1, moulded expanded polystyrene (EPS) insulation with an R-value of 3.75 per inch and compressive resistance of 10 psi. PlastiSpan is a versatile insulation product that can be used in a wide range of applications. PlastiSpan EPS is a closed cell, rigid foam plastic insulation that maintains its R-value for the life of the product. When applied as continuous insulation over foundations, walls and roofs, PlastiSpan insulation is a cost-effective solution that eliminates thermal bridging, increasing your total R-value. By increasing your energy efficiency with PlastiSpan insulation, you will effectively reduce your heating and cooling costs. PlastiSpan Insulation is code listed with CCMC 12424-L and meets the requirements of CAN ULC S701.1, Type 1.

• Meets all building codes for above & below grade
• Most cost-effective insulation per R-value
• Thermal resistance - RSI 0.65/25 mm (R-value 3.75/inch)
• Closed cell insulation resists moisture
• Compressive Resistance: 10 psi
• Easy to cut and install
• Maintains R-value
• Increases energy efficiency for reduced heating and cooling costs
• Can be used in Retrofit & new construction

PlastiSpan Insulation is a Type 1, moulded expanded polystyrene (EPS) insulation with an R-value of 3.75 per inch and compressive resistance of 10 psi. PlastiSpan is a versatile insulation product that can be used in a wide range of applications. PlastiSpan EPS is a closed cell, rigid foam plastic insulation that maintains its R-value for the life of the product. When applied as continuous insulation over foundations, walls and roofs, PlastiSpan insulation is a cost-effective solution that eliminates thermal bridging, increasing your total R-value. By increasing your energy efficiency with PlastiSpan insulation, you will effectively reduce your heating and cooling costs. PlastiSpan Insulation is code listed with CCMC 12424-L and meets the requirements of CAN ULC S701.1, Type 1.

• Meets all building codes for above & below grade
• Most cost-effective insulation per R-value
• Thermal resistance - RSI 0.65/25 mm (R-value 3.75/inch)
• Closed cell insulation resists moisture
• Compressive Resistance: 10 psi
• Easy to cut and install
• Maintains R-value
• Increases energy efficiency for reduced heating and cooling costs
• Can be used in Retrofit & new construction