STIHL TS 700 Cutquik® Cut-Off Saw (98.5cc) - 14"

The STIHL TS 700 gas cut-off machine with 350 mm synthetic composite resin cutting wheel, such as the STIHL composite resin cutting wheel for steel, is a very powerful high-performance tool for professionals. With its powerful STIHL 2-MIX engine, the TS 700 cut-off machine is suitable for applications where the quality and thickness of the material require high performance. The motorised cut-off machine can be guided manually. As you do this, the ergonomic handle design withloop handle ensures that you hold the device securely. For professional applications inconstruction or road construction, we also recommend using the STIHL FW 20 cart, which allows for more precise cuts and facilitates longer cutting lengths. The STIHL ElastoStart function, in conjunction with the decompression valve, allows for effortless starting of the STIHL TS 700’s gas engine, while the STIHL anti-vibration system protects your muscles and joints as you work. The placement of the water connection for wetting the cutting wheel helps you to work effectively. Thanks to the long-life air filter system and the compensator, the cleaning interval is extended, ensuring you can use the STIHL TS 700 for longer periods without interruption. Semi-automatic belt tensioning extends the belt and bearing service life.

• Decompression Valve - The decompression valve reduces the compression in the combustion chamber during cranking and helps reduce the effort needed to pull the starter rope.
• Reduced-Emission Engine Technology - Caring for Nature - The STIHL Inc. “Caring for Nature” seal identifies its powered products that are more environmentally conscious, producing zero or low exhaust emissions. STIHL Inc. defines “low exhaust emissions” as being cleaner than EPA and/or CARB exhaust emission standards.
• IntelliCarb™ Compensating Carburetor - The IntelliCarb™ Compensating Carburetor is designed to automatically adjust the air/fuel ratio when the air filter becomes restricted or partially clogged and maintains the engine’s correct RPM. IntelliCarb™ uses air from the clean side of the air filter to control the diaphragm and flow of fuel. As the air filter becomes dirty and less air is available for the carburetor, the IntelliCarb™ system adjusts the fuel flow to compensate for the decrease in air flow. This is in contrast to typical carburetors that utilize this air from the “dirty” side of the air box.
• X2 Air Filtration System - The X2 Air Filtration System revolutionizes the cut-off machine industry by allowing air filters to last up to a year, based on cutting conditions. Outside air enters the system in a swirling motion, removing 80% of dust particles. This pre-cleaned air is then routed through the primary and secondary air filters before being sent into the engine. The X2 Air Filtration System is virtually maintenance free and maintains an incredible 99.96% cleaning efficiency.
• STIHL ElastoStart™ - The ElastoStart™ starter handle is a feature of STIHL. It is a starting grip with a built-in shock absorber that helps reduce the effort when pulling on the starter cord. The ElastoStart™ starter grip noticeably reduces the sudden peak forces (compression) normally felt during cranking. The forces which occur at the grip after the first compression stroke are smoothed out.
• Bayonet-Style Filler Cap - Includes retainer for easy use, even with gloves on.
• Anti-Vibration System - STIHL has developed a system for minimizing the vibration levels of handheld outdoor power equipment. The STIHL anti-vibration system helps reduce operator fatigue and provides a more comfortable working experience.
• Semi-Automatic Belt Tensioning - With consistent semi-automatic re-tensioning, this feature increases the service life of the belts and shaft bearings.
• Ergonomic Grip - The ergonomic top-handle bar design provides an optimal comfortable grip in any working position.