The Screw-Bolt+ anchor is a one piece, heavy duty screw anchor with a finished hex head or flat head (countersunk). It is simple to install, easy t...
Interfast Anchor Bolts are plain oiled and include an SAE washer and nut for secure fastening.
The UCAN WAG anchor is a fully threaded torque controlled expansion anchor assembled with a three segment expansion clip. All parts are galvanized ...
The UCAN flat-head phillips sleeve anchor is ideal for applications in which the fastener head must be flush with the fixture surface.
WITH ISO GRADE 6.8 BOLTThese anchors provide a finished bolt head, which is desirable in many applications.
The UCAN sleeve anchor is a medium duty anchor ideal for applications in concrete, hollow block and brick. It is a mechanical expansion anchor asse...
The UCAN Insulation fastener is made from an impact resistant low density Polyethylene or Polypropylene copolymer material and is used for fastenin...
Screw type expansion anchor cast from rust proof zamac alloy. The lag shield is ideally suited for base materials of questionable integrity. The la...
The UCAN Drive Screw Anchor is manufactured from a tough and durable Nylon-6 and is preassembled with a zinc plated phillips or square socket drive...
The UCAN ISS stainless steel anchors are fully threaded torque controlled expansion anchors assembled with a three segment expansion clip. The anch...
UCAN TORPEDO® BOLT is an excellent anchoring solution for medium duty applications. TORPEDO® is now available in zinc plated and mechanically galva...
Economical plastic plugs for light loads. This plug can be used in masonry, plaster and even hollow walls to support light loads. Typical Applicati...
The UCAN Zamac pin bolt is a light duty, tamperproof anchor which has a zinc plated or stainless steel pin preassembled with a body made from a cor...
Screw type expansion anchors die cast from Zamac alloy. Can be used in concrete, block, brick and stone. Ideally suited for materials of questionab...
UCAN TZ torque controlled mechanical expansion wedge anchors have a Category 1 classification. They are used to resist static, wind and seismic ten...
Specifically designed for installation of suspended ceilings. 1/4″ X 2″ for attaching wire hanger to light gauge steel eyebeams or corrugated deck...
The Tie Wire wedge anchor is designed primarily for suspended ceiling installation. The anchor consists of a 1/4″ dia. steel body with 9/32″ diame...
UCAN TWISTER® II is a nylon anchor used in conjunction with a #8 screw to attach fixtures to drywall. This anchor is installed using a hand or cord...
The UCAN Hollow Wall anchor is a light duty screw type expansion anchor designed specifically for fastening to cavity walls, constructed of drywall...
UCAN Tip Toggle is a versatile, steel hollow cavity wall anchor. UCAN Tip Toggle is a versatile, steel hollow cavity wall anchor Assembled with 3/...